必赢626net入口|主页

ZZC (V) self operated differential (micro) pressure regulating valve

ZZC (V) self operated differential (micro) pressure regulating valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The ZZC (V) self operated differential (micro) pressure regulating valve is a kind of actuator product which does not need additional energy. It can be used for nominal pressure PN01, PN10. Differential (micro) pressure can be adjusted piecewise. From 50mm.W.C to 0.1MPa. Its application is very extensive and can be used in industrial combustion furnace system. Control two kinds of materials, such as gas and air flow ratio, so as to achieve ideal combustion. It is used for sealing oil system of hydrogen-cooled power generation unit to control the pressure difference between sealing oil and hydrogen to ensure reliable sealing. The low pressure end of the differential pressure valve is a micro pressure valve (negative pressure, differential pressure, zero force).


There are two types of differential (micro) pressure regulating valves, B and K. The initial position of the B valve spool is always open, and the differential (micro) pressure is closed when it increases. The initial position of the K valve spool is usually closed and the differential (micro) pressure increases when it opens.


Characteristic


No need to stop production, that is, setting the value adjustment.


No packing, no friction exists when the stem is moving up and down, and the upper seal is absolutely reliable.


The actuator is sensitive and sensitive, and tiny pressure changes will be detected.


The valve body is in the form of four links, so K and B can be used for a valve body.


application


A. hydrogen cooled generator seal oil system;


Circulating air volume control of B. fan heating system;


C. two gas flow ratio control;


D. pump bypass regulation


Model compilation

Main technical parameters


Nominal pathDN(mm)
20
25
32
40
50
65
80
100
Rated flow rate System effectKv
ZZCP / ZZVP
8
11
20
32
50
80
100
160
ZZCN
53
83






Rated travel(mm)
6
8
10
15
20
Nominal pressurePN(MPa)
0.10 1.0
Differential pressure regulating range(kPa)
0.5~5.5 5~10 9~14 13~19 18~24 22~28 26~33 31~38
36~44 42~51 49~58 56~66 64~78 76~90 8~100
Medium temperature(℃)
≤80
Adjustment precision(%)
≤10
Allow leakage amount(l/h)
ZZCP / ZZVP
10-4 * valve rated capacity (grade IV)
ZZCN
5 * 10-3 * valve rated capacity (grade II)


Note: 1. ZZCP/ZZVP nominal pressure is 0.1MPa, ZZCN is 1.0MPa


2. ZZCN differential pressure range is 36~44, 42~51, 49~58, 56~66, 64~78, 76~90, 88 to 100KPa.

Material of main parts


No
Name
Material Science
No
Name
Material Science
1
Seal
2Cr13
1
uppervalve seat
1Cr18Ni9Ti
2
Spring seat
45
2
lowervalve seat
1Cr18Ni9Ti
3
Spring
60Si2Mn
3
Adjusting disk
2Cr13
4
Tray
1Cr18Ni9Ti
4
Spring seat
45
5
diaphragm
NBR
5
corrugated pipe
1Cr18Ni9Ti
6
Smalldiaphragm
Oil resistant rubber
6
Actuator external cavity
Q235
7
spool
PTFE
7
Push rod
2Cr13
8
valve seat
1Cr18Ni9Ti
8
Stem
1Cr18Ni9Ti
9
valve body
ZG230-450
ZG1Cr18Ni9Ti
9
spool
1Cr18Ni9Ti
10
valve body
ZG230-450


Main dimensions


DN
20
25
32
40
50
65
80
100
A
308
394
308
394
308
394
394
394
H
ZZCP / ZZVP
376
465
365
445
445
490
490
510
ZZCN
536
536
L
ZZCP / ZZVP
150
160
180
200
290
290
310
350
ZZCN
222
222
Weight G(Kg)
12
13
15
17
20
38
38
43
Threaded joint for pressure pipe
M16×1.5


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZZC (V) self operated differential (micro) pressure regulating valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!