必赢626net入口|主页

800X differential pressure bypass balance valve

800X differential pressure bypass balance valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The 800X differential pressure bypass balance valve is a kind of valve that balances the pressure difference between the supply and return water of the air conditioning system. Differential pressure by-pass valve can improve the utilization rate of the system, maintain accurate pressure difference straightening each other, and minimize the noise of the system, as well as damage to equipment caused by excessive pressure difference. The 800X differential pressure balance valve is superior to other balancing valves in that it has no actuator, and the pressure difference of the medium itself can achieve the function of balancing system, save energy and installation space. It is an intelligent valve.

Performance characteristics

1, constant valve ends and controlled system pressure difference, to support user system variable flow operation.

2, automatic work depends on pressure difference without external power.

3, can directly show the control pressure difference.

4, can directly set the control pressure difference.

5, control differential pressure adjustment is sensitive, simple operation.

6, medium temperature: 0~150 C.

7. Adjustable range of pressure control: 0.05~0.6Mpa

8. The error of control pressure difference is less than or equal to 5%.

Main uses

Normally closed by-pass pressure difference control valve is used between fuel and gas heat source supply and return pipes, central air conditioning distributors and water collectors. As a primary flow measurement, secondary side variable flow system by-pass installation can effectively protect fuel and gas units from excessive temperature damage caused by flow too small, can effectively protect cold water. The unit is damaged by local freezing caused by too small flow.

Normally open by-pass pressure difference control valve is used in central heating system with large height difference and high heat source. The pressure difference of the valve is set according to the height difference, and the pressure reducing pump and check valve are installed at the proper position of the return pipe in the low area. The pressure of the return pipe is adjusted and set by adjusting the valve. It can not only ensure that the users in the high area will not empty, but also protect the equipment in the low area from damage due to high pressure.

Main shape connection dimensions


DN
50
65
80
100
125
150
200
250
300
350
400
450
L
203
216
241
292
330
350
495
622
698
787
914
978
H1
160
180
200
270
310
320
370
430
480
525
580
635
H
610
625
642
750
808
864
1135
1185
1325
1385
1445
1445


installation diagram

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.800X differential pressure bypass balance valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!