必赢626net入口|主页

ZCM gas solenoid valve

ZCM gas solenoid valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

ZCM solenoid valve is a kind of actuator which can be used to switch on and off for heating and burning medium pipeline of city gas, liquefied petroleum gas, natural gas and so on. It is widely used in textile industry, printing industry gas heat setting and glass, light bulb industry kiln heating and other industries gas heating automatic control system.

Often closed type

This valve DNl5-50 is a direct-acting low-pressure solenoid valve with primary valve opening, DN65-300 is a pilot solenoid valve with secondary valve opening. Direct-acting solenoid valve after receiving electrical signals, electromagnetic force will directly lift the plug, media flow; after power failure, electromagnetic force disappears, plug in the weight and spring force for the fall, media cut off.

The pilot solenoid valve receives the electric signal, the armature drives the auxiliary valve plug to catch up under the electromagnetic force, the fluid on the main valve diaphragm flows away through the auxiliary valve, reducing the pressure acting on the main valve diaphragm. When the pressure on the main valve diaphragm decreases to a certain value, the armature drives the main valve diaphragm, and makes the main valve open by the pressure difference. Mass flow; after the coil is cut off, the electromagnetic force disappears, the armature is reset due to the weight drop, and the main valve is closed tightly by the medium pressure.

Often open type

The valve has a unique direct-acting structure. When the coil of the electromagnetic head is energized, the static core assembly located around the coil is convenient.

The magnetic force overcomes the gravity of the stem assembly and the elastic force of the return spring, and then sucks up the moving iron core together with the stem assembly, so that the valve disc fixed on the stem assembly is tightly sealed with the valve seat, and the valve closes. After power failure, the disc restores to its original position under the gravity of the return spring and the stem assembly, and the valve opens. The pipe returned to normal ventilation.

Model description

technical parameter


公称通径(mm)
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
工作介质
煤气、液化石油气和天然气等燃气
介质温度℃
-20~80
环境温度℃
-40~60
公称压力(MPa)
1.0
工作压差(MPa)
0~0.03
0~0.1
安装方式
垂直安装
电源电压
AC220V DC24V 其它规格可作特殊订货
工作电流(A)
直流
0.13
0.17
0.41
0.71
1.1
交流
0.13
0.17
0.41
0.71
1.1
功率(VA)
直流
26
30
80
140
220
交流
26
30
80
140
220
防爆标志
Exd IIBT4


Installation size
常闭型
公称通径
DN
内螺纹连接
法兰连接
外形尺寸
内螺纹
外形尺寸
法兰尺寸
H
L
G
H
L
D
D1
D2
b
f
n-d
15
153
92
1-2
210
130
95
65
46
14
2
4-φ14
20
153
92
3-4
210
150
105
75
56
16
2
4-φ14
25
153
110
1
210
160
115
85
65
16
3
4-φ14
32
176
120
1 1 /4
221
180
140
100
76
18
3
4-φ18
40
176
140
1 1 /2
230
200
150
110
84
18
3
4-φ18
50
192
162
2
252
230
165
125
99
20
3
4-φ18
65
-
-
-
390
290
185
145
118
20
3
4-φ18
80
-
-
-
401
310
200
160
132
22
3
8-φ18
100
-
-
-
408
350
220
180
156
24
3
8-φ18
125
-
-
-
424
400
250
210
184
26
3
8-φ18
150
-
-
-
515
480
285
240
211
26
3
8-φ22
200
-
-
-
540
600
340
295
266
26
3
8-φ22
250
-
-
-
573
730
395
350
319
28
3
12-φ22
300
-
-
-
608
850
445
400
370
28
4
12-φ22
350
-
-
-
700
980
505
460
429
28
4
12-φ22
常开型
公称通径
DN
内螺纹连接
法兰连接
外形尺寸
内螺纹
外形尺寸
法兰尺寸
H
L
G
H
L
D
D1
D2
b
f
n-d
15
153
92
1-2
154
130
95
65
46
14
2
4-φ14
20
153
92
3-4
154
150
105
75
56
16
2
4-φ14
25
153
110
1
156.5
160
115
85
65
16
3
4-φ14
32
176
120
1 1 /4
178
180
140
100
76
18
3
4-φ18
40
176
140
1 1 /2
186
200
150
110
84
18
3
4-φ18
50
192
162
2
193
230
165
125
99
20
3
4-φ18
65
-
-
-
461
290
185
145
118
20
3
4-φ18
80
-
-
-
481
310
200
160
132
22
3
8-φ18
100
-
-
-
531
350
220
180
156
24
3
8-φ18
125
-
-
-
551
400
250
210
184
26
3
8-φ18
150
-
-
-
627
480
285
240
211
26
3
8-φ22
200
-
-
-
725
600
340
295
266
26
3
8-φ22
250
-
-
-
842
730
395
350
319
28
3
12-φ22
300
-
-
872
850
445
400
370
28
4
12-φ22

350
-
-
-
-
980
505
460
429
30
4
16-φ22

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZCM gas solenoid valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!